Products

DESCRIPTION

• Overview
• Product Description
• Specification
• Company Profile
• ODM&OEM
• Packaging & Shipping
• Other service industry
• Our exhibition
• FAQ

Overview

Basic Info.

Model NO.	HFSDA2060-200-M
Support Network	Customized
Information content	Data
Certification	CE, RoHS
Condition	New
Transmission Rate	≥20kbps
Channel	Wideband
Frequency Band	U, L, and S Bands
Output Power	30W to 200W, Support Customized
Operation2	Mobile Phones, Radio Stations, and Drones
Bandwidth	up to 200MHz
Operating Temperature	-40 - +60 Degree
Altitude	Mil-Std-810f Method 500.4
Vibration/Shock	Pass Mil-Std-810f-Method 514.5&516.5
Transport Package	Carton
Specification	125*59*25mm
Trademark	Eversmart
Origin	China
HS Code	8543709200
Production Capacity	5000PCS/Year

Product Description

Product DescriptionProduct IntroductionThe HFSDA2060-100-M is a highly reliable amplifier.It employs ultra-wideband GaN transistors that can output 100 watts of power within the 2GHz to 6GHz frequency range while maintaining relevant RF performance.In contrast to traditional CW amplifiers,this amplifier can amplify spread-spectrum signals,with an instant bandwidth of up to 200 MHz. When paired with the appropriate SDR digital excitation source,it can produce excellent interference effects on remote control,data transmission,and positioning signals.Therefore,this amplifier is particularly suitable for use in wireless communication interference systems in the U,L,and S bands,including but not limited to mobile phones,radiio stations,and drones.
Applicaton and Feature Utilizing third-generation GaN transistors Ultra-wide working bandwidth and instant bandwidth Excellent reliability Features temperature detection,standing-wave detection,and protection functions RS485 serial interface for monitoring and controlSpecificationProduct ParameterElectrical Specifications.

Parameter	Min	Typ	Max	Unit	Test Condition
Operating Frequency	2000		6000	MHz
Instant bandwidth			200	MHz	Broadband signal,such as OFDM signal
Output power(Psat)	160		200	W	CW signal
Gain(small signal)	44		54	dB	Measured with VNA in swept frequency mode at -20dBm. Input power calibrated/measured at the amplifier input port.
Gain flatness(small signal)	-3		3	dB	Test condition the same as Gain
Gain adjustment range [note1]	20		-	dB	Test condition the same as Gain
Gain adjustment step size [note1]	0.5		-	dB	Test condition the same as Gain
Noise figure			20	dB
Input VSWR			1.8		Measured with VNA in swept frequency mode at -20dBm. Input power calibrated/measured at the amplifier input port.
Spurious		-60		dBc	CW signal at the output power of 200W. Spurious defined as any non-harmonic amplifier outpur. Spurious measured in a 1kHz resolution bandwidth,10kHz video bandwidth.Specifications apply at offsets of greater than or equal to ±10kHz from the RF carrier. Maximum measurement frequency is 8GHz
Harmonics(2nd, 3nd)	-10			dBc	CW signal source at output power of 200W
Operating voltage	24	28	32	V	Note:Output power capabilities and gain will vary with voltage
Operating current		29	36	A	CW signal source at output power of 200W
PA Enable/Disable time			1	us	Measurement with of 200W CW output.Rise and fall time of amplifier output envelope recorded.Rise and fall times at 10%-90% of the output power in linear scale.PA Enable/ Disable signal set to 10kHz repetition rate and 50% duty cycle
[note1]:This function is optional.

Environmental Specifications
Parameter	Min	Typ	Max	Unit
Operating temperature	-40		60	℃
Storage temperature	-55		85	℃
Relative Humidity (non-condensing)			95	%
Altitude	MIL-STD-810F Method 500.4
Vibration/Shock	Passed MIL-STD-810F - Method 514.5/516.5 – Proc I

Mechanical Specifications
Parameter	Value	Unit
Dimension	200 x 158x 25	mm
Weight	1.4	kg
RF Connectors In/Out	Input: SMA-F Output: N-F
Control Connector	D-Sub 15-Pin Male -
Power Supply Connector	Pull-core Capacitance
Cooling	External Heat sink

DC Interface Connector
PIN#	Description	Specification
Grounding Post	GND	Ground Return
Pull-core Capacitance	GND	Supply Voltage:+24V~32V,+28V Nominal
1	RS485 (-) [note1]	Serial Communication Bus
2	Voltage Alarm [note1]	Alarm(5V), the amplifier shut down when the voltage exceeds 32V,the status will be locked.
3	Current Alarm [note1]	Alarm(5V), the amplifier shut down when the current exceeds 38A.,the status will be locked.
5	Attenuator setting [note1]	Voltage input in the range of 0.5-3.0VDC, 0.5VDC corresponds with minimum attenuation, 3.0VDC is maximum attenuation.
6	Alarm Reset	If the alarm has been triggered,input an extermal pulse singal to reset it
7	Pr	Reversed RF Power Indicator (0~3V)
8	RS485 (+) [note1]	Serial Communication Bus
10	Pf	Forward RF Power Indicator (0~3V)
11	PA_EN	PA on :0V or the Handing PA off :Inout 3.3V or 5V
12	TA	Alarm(5V), when the temperature exceeds 80℃±5℃ and the amplifier shutdown
13	VA	Alarm(5V), When the output port of the amplifier is open or short, the amplifier will shutdown.
14	Tc	Analog voltage relative to Unit’s Temperature @ 10mV/℃ (0.50Voffset); (Vmeausred-0.50)/0.01=X℃, Example: (1.00V-0.50)/0.01= 50℃
4,9,15	NC
[note1]:This function is optional.
The RS485 master-slave communication function can be used to monitor the operational parameters of the power amplifier module, such as voltage, current, output power, and standing wave, and it can also be used to set the control parameters of the power amplifier in real time, such as power amplifier on/off, gain adjustment, power adjustment, and alarm reset.

Company Profile

Shenzhen Eversmart Technology Co., Ltd. was founded in 2014, is a high-tech enterprise integrating research and development, production and sales. Since its inception, the company has taken security products as its main business, and since 2018, the R&D team has begun to layout the chip and device application development. The company has an independent design gallium nitride RF chip technology team, with a rich RF product line, covering telecommunications infrastructure, drone interference and other types of market applications, forming a gallium nitride chip design to the amplifier tube device, modularized series of products.

Eversmart provides customers with RF power amplifiers for telecommunication infrastructure, broadband drive-level RF power amplifiers, wireless signal control systems, wireless signal countermeasure systems, wireless signal blocking equipment, explosion-proof jamming equipment and typical application solutions. The products are widely used in communications, scientific research institutes, special areas of communication RF modules, communication signal coverage systems, professional measurement equipment and electronic countermeasures and other fields.

ODM&OEM

Packaging & Shipping

Other service industry

Our exhibition

FAQ1.Q: What types of drones can your system detect? A: Our detection system can identify a wide range of commercial, consumer, and custom-built drones, including DJI, Autel, Parrot, and FPV drones. It supports detection based on RF signals, GNSS interference, and drone protocol analysis. 2.Q: Does the device support FPV drones? A:Yes. Our advanced signal analysis module supports detection of analog and digital FPV drones by identifying unique transmission characteristics and frequency bands used in real-time video transmission. 3.Q: Is your drone detect system portable or fixed. A: We offer multiple formats: 1:Portable systems: Backpack-style or gun-type models for quick deployment 2:Vehicle-mounted systems: For mobile protection 3:Fixed installations: For critical infrastructure or border security 4. Q: Can your system integrate with other security platforms (e.g., cameras, radars)? A: Yes. Our platform supports integration via SDK or API with external sensors like PTZ cameras, radars, acoustic sensors, and C2 platforms. 5.Q: Is a license required to use drone jammers? A: In many countries, jammers are regulated or restricted to law enforcement, or authorized users. Please consult your local laws. We can support documentation for government or tender processes if needed. 6.Q: What is your warranty policy? A: All products come with a 1-year warranty, covering manufacturing defects. Lifetime technical support is also available. 7.Q: Do you offer on-site installation and training? A:Yes. We provide remote support, and for large-scale or government projects, on-site training and commissioning services can be arranged. 8.Q: Can I test a sample before placing a bulk order? A:Yes, sample units are available for evaluation. Please contact our sales team for pricing and demo terms.